Recommended Web page is a simple and effective method to safeguard your vehicle from theft. It is directly connected to the CAN network of your vehicle and is hardly noticeable.
First, you must identify a constant power source and an earthing point. It is crucial to ensure that these wires are properly insulated to prevent electrical shorts.
The prevention of theft
The Ghost 2 Immobiliser uses a unique PIN code sequence created using the existing electronic buttons on your steering wheel and centre console to ensure that only you can start your vehicle. This means that even if thieves manage to steal your keys or hack into your car's systems, they won't be able get the vehicle moving. It's also silent and completely undetectable to anyone who tries to use it, so you can rest assured that no one will know that you have added an extra layer of security.
Another reason that it is so effective in preventing theft is its ability to stop your engine even if a thief has managed to get in. This is accomplished through a secondary device, called the Shadow. It is connected to your vehicle's CAN network and does not communicate via radio frequency. This makes it difficult for thieves or others to find. The Shadow can also be connected to your vehicle's tracking/paging system, allowing you to monitor its movements. It also has an output that can be used to trigger an alarm when someone tries to take it.
When working with wires it is crucial to work in an area that is well-lit. This will enable you to identify the correct wires and avoid accidental short circuits or disconnections. It is also important to double-check and test connections, and to insulate the wiring to shield it from the elements. It is also recommended to use cable tie to secure and bundle the wires, which improves their appearance and reduce the risk of them being dislodged during driving.
It is also a great idea to mark the CAN L and H wires with tape or labels. An incorrect identification of their position could trigger a surge of power that damages the immobiliser. It is also a good idea to test the power source and grounding point with a multimeter to ensure that they are providing a steady 12V supply and a solid grounding.
Easy to use
A ghost immobiliser is a great way to safeguard your vehicle from theft. Recommended Web page can be connected with an iPhone application for simple management and monitoring. The app can also send notifications if your car has been altered. The app can also assist you to locate your vehicle in the event that it is stolen.
The Ghost immobiliser operates without any special equipment. It is linked to the CAN system of your vehicle and programmed with an individual PIN code. It's activated using a set of buttons on your dashboard or steering wheel, or through the WeCar mobile app. The code is required to be entered before the engine can start, so thieves cannot simply turn off your car and drive off.
Installing a ghost immobiliser can be a straightforward process, but it's important to follow the steps carefully to ensure that it is a seamless integration with your vehicle's existing systems. The first step is to disconnect the battery. This will avoid an accidently triggered airbag, and also ensure safety. It's also crucial to work in a well-lit location to make accurate connections and avoid mistakes. It is also essential to employ proper soldering techniques or high-quality connectors to ensure a strong and secure connection.
The CAN H wire and the CAN L wiring are required to connect your Ghost immobiliser with your vehicle's wiring. With a wiring diagram for your vehicle to identify these wires, find a suitable place to connect them. Mark these wires with tape or labels to make them easier to identify when installing.
It's a good idea test your immobiliser after connections are made to ensure that it is working as intended. You should also test the Transport Mode which disables the Ghost System and lets you temporarily disable your security functions. This is particularly useful for scenarios such as servicing or transportation of vehicles. This feature is particularly beneficial in the event that your vehicle is old and requires the battery to be isolated during service.
Low-profile
A ghost immobiliser is the ideal way to stop theft from keyless entry vehicles and vans. It works by capturing the vehicle's remote control signal and creating a barrier so that thieves can't breach it without the correct PIN code. It's a discreet and reliable method to safeguard your vehicle and is recommended by insurance companies to reduce monthly cost. It's a low-profile and concealed system that can be located in your car's buttons. It doesn't feature LED indicators and is therefore almost unnoticeable by thieves.
Unlike most other security systems like unlike most security systems, the Ghost immobiliser is connected to your vehicle's CAN data network instead of the key fob. The device is tamper proof and thieves can't disable it by cutting wires. This makes it more difficult to steal your vehicle and it's an excellent option for older vehicles that aren't equipped with a keyless entry system.
Installing a ghost immobiliser is easy if you have the right equipment and materials. You'll require basic hand tools as well as a multimeter to test electrical values, as well as cable tie or insulation tape to ensure your connections are secure and well-insulated. Before starting the engine, you must disconnect your battery and ensure that all wiring is neatly bundled. This will prevent thieves from tampering.
You can ask an authorised shop to install your immobiliser if you aren't confident doing it yourself. They'll take care of the entire procedure starting with the initial inspection through to the installation. If something is not working, they'll offer a warranty. They'll be capable of answering any questions you may have about the immobiliser and assist you in deciding whether it's the right option for your vehicle.
The Autowatch Ghost 2 is a intelligent immobiliser that connects directly with the ECU of your car. This helps protect against key cloning and hacking attacks, which are common in modern automobiles. It is TASSA-certified and offers superior theft protection, so you can drive with confidence.
TASSA verified
The Ghost immobiliser system is one of the most effective methods to safeguard your vehicle from theft. It connects to the CAN data network of your car and blocks the engine from starting without your personal PIN code. The system is undetectable by thieves which makes it a fantastic alternative to a car alarm. You can alter the PIN code at any time and only you'll know it, which will ensure your vehicle's security.
Installers TASSA certified will install the Ghost system in your office or home within a couple of hours. They will also give you owner's guides, installation certificates and a no-cost emergency card. They will also give you a a thorough demonstration of the device and make sure that you are happy with the service before they leave.
The Ghost, unlike other immobilisers, can connect directly to the CAN data network of your vehicle. This lets it be installed without severing any wires. It's also quiet, making it difficult to detect by thieves. The system has a unique and reversible PIN code that you enter by pressing buttons on the dashboard or wheel. This blocks anyone from starting your car even if they possess your key fobs.
If you're ready to install a ghost 2 immobiliser, you should begin by disconnecting the battery. This will prevent the possibility of accidental airbag deployments and short circuits. When the battery is removed it is recommended to follow the instructions in the user manual to connect the immobiliser. You should also consult online resources for further guidance specific to your vehicle's model.
Upon completion, you should test the immobiliser to ensure that it works properly. Enter the PIN code into the vehicle and then try to start it. Then, you should conduct regular tests on the immobiliser to ensure it is working properly. This will enable you to detect any issues early and resolve them quickly.